Aluminium cable clamps and tools
Tost Flugzeuggerätebau > Produkte > Cables and Cable tools > Accessories and tools > Aluminium cable clamps and tools
Tools for cable clamps from aluminium
Tost Top and bottom tool for aluminium cable clamps
For making of simple and economical cable connections using cable clamps made of aluminium, type A, cylindrical.
Tool sizes 2-5, forged steel, specially hardened, extra strong version, replace- able guide pins.
Tool length 185 mm, mass 1580 g.
Operating notes:
- Grease the bore hole well before pressing
- Stand the tool on a thick steel plate
- Choose the correct combination of cable/clamp/tool
- Put the tool halves together correctly
Detailed operating instructions supplied with the tool
Allocation cable clamp to cable and tool
| P/N tool |
Cable Ø in mm | Tool No. | P/N clamp |
| 220200 | 1,2 – 1,6 | 2 | 221200 |
| 220250 | 1,7 – 2,1 | 2,5 | 221250 |
| 220300 | 2,2 – 2,6 | 3 | 221300 |
| 220350 | 2,7 – 3,1 | 3,5 | 221350 |
| 220400 | 3,2 – 3,6 | 4 | 221400 |
| 220450 | 3,7 – 4,2 | 4,5 | 221450 |
| 220500 | 4,3 – 4,6 | 5 | 221500 |
Cable cutter
For proper cutting of steel cables
- Proper cut, no deformation or crushing
- Single strands do not uncoil
- Cutting without excessive effort, easy one-handed operation
- Suitable for use inside aircraft fuselage
| P/N |
Cable Ø in mm | Type of cable | Length mm |
Mass g |
| 216070 | up to 5 mm | Steel cable with steel or hemp core also stainless steel cable |
170 | 290 |
Splicing needle
For splicing and thimble splicing of steel cables. Tool with wooden handle and hardened needle with strand groove.
| P/N |
Length mm |
Length of needle mm |
Mass g |
| 212000 | 210 | 90 | 85 |
