Standard hydraulic hoses
Tost Flugzeuggerätebau > Produkte > Hydraulic brake system TOST > Hydraulic hoses > Standard hydraulic hoses
We also offer a large selection of standard hydraulic hoses, in addition to the indi- vidualy fitted types of hydraulic hoses.
We offer Polyflex hoses with low weight or Stahlflex hoses for tight bents and greater hose lengths.
| P/N | Descript. | Fluid | Material | Length mm
|
Connection |
| 058712 | Type 1 | DOT4, Mineral Fluid |
Stahlflex | 250 | straight pipe socket |
| 058716 | Type 1 | DOT4, Mineral Fluid |
Stahlflex | 600 | straight pipe socket |
| 058721 | Type 1 | DOT4, Mineral Fluid |
Stahlflex | 1120 | straight pipe socket |
| 058724 | Type 1 | DOT4, Mineral Fluid |
Stahlflex | 1240 | straight pipe socket |
| 058423 | Type 2 | DOT4, Mineral Fluid |
Polyflex | 300 | o/s: eye ring Ø 10 mm o/s: JIC04 spigot nut |
| 058765 | Type 2 | DOT4, Mineral Fluid |
Stahlflex | 500 | o/s: eye ring Ø 10 mm o/s: JIC04 spigot nut |
| 058766 | Type 2 | DOT4, Mineral Fluid |
Stahlflex | 600 | o/s: eye ring Ø 10 mm o/s: JIC04 spigot nut |
| 058490 | Type 2 | DOT4, Mineral Fluid |
Polyflex | 900 | o/s: eye ring Ø 10 mm o/s: JIC04 spigot nut |
| 058330 | Type 3 | DOT4, Mineral Fluid |
Polyflex | 300 | o/s: eye ring Ø 10 mm o/s: JIC04 spigot nut |
| 058350 | Type 3 | DOT4, Mineral Fluid |
Polyflex | 500 | o/s: eye ring Ø 10 mm o/s: JIC04 spigot nut |
| 058360 | Type 3 | DOT4, Mineral Fluid |
Polyflex | 600 | o/s: eye ring Ø 10 mm o/s: JIC04 spigot nut |
| 058375 | Type 3 | DOT4, Mineral Fluid |
Polyflex | 750 | o/s: eye ring Ø 10 mm o/s: JIC04 spigot nut |
| 058380 | Type 3 | DOT4, Mineral Fluid |
Stahlflex | 850 | o/s: eye ring Ø 10 mm o/s: JIC04 spigot nut |
| 058390 | Type 3 | DOT4, Mineral Fluid |
Polyflex | 900 | o/s: eye ring Ø 10 mm o/s: JIC04 spigot nut |
| 058310 | Type 4 | DOT4, Mineral Fluid |
Polyflex | 700 | both sides eye ring Ø 10 mm |
| 058366 | Type 5 | DOT4, Mineral Fluid |
Polyflex | 600 | for Janus |
Installation notes:
- Hydraulic hoses must be installed twist-free to prevent weakening of the material. If twisted hoses are put under pressure, they can work loose from their fittings.
- Hydraulic hoses must be laid with large enough bends to prevent pinching of the hose. Pinching reduces the cross-sectional area and impairs braking per- formance.
- The life expectancy of a hydraulic hose is reduced significantly by too small bending radii. Use hoses made of steelflex (material b) if you cannot avoid tight bends.
